About Us

INSTALLATION/BREAK-IN PROCEDURES:

Our engine products are designed to provide years of trouble-free service. In order for your engine to perform as expected, it must be installed correctly, operated responsibly and properly maintained. Your engine requires special care during its initial “break-in” period. To ensure your engine's long life expectancy and proper engine performance, please follow these procedures during the first 600 miles of operation. Once the product has been installed, it is the owner’s responsibility to break-in the product properly. After the break-in period (600 miles or 2 weeks whichever comes first), the engine oil must be changed every 4 months or 4,500 miles (whichever comes first) for warranty purposes. Failure to do so will result in your warranty being void. It is very important for OEM maintenance intervals to be followed, the replacement engine requires the same service level. We require your vehicle be serviced at an ASE certified-repair facility only. Please retain repair records for future reference in the event of a failure.

Please do the following:

Do not drive for long periods at any single speed, always vary your speed.

Do not tow a trailer or put other heavy loads on the vehicle.

Check the engine oil and coolant levels daily.

Check fuel and ignition settings.

Change engine oil and filter (break in and scheduled maint.)

Adjust Valves (where applicable).

**Change engine oil every 4 months or 4500 miles whichever comes first**